Shimano recalls certain 11-speed HOLLOWTECH II road cranksets
Shimano has issued a voluntary inspection and replacement notice for selected bonded 11-speed HOLLOWTECH II road cranksets, produced between 1 June 2012, up to and including 30 June 2019, for a possible bonding separation issue.
To remedy this situation, Shimano will have applicable, pre-July 2019, cranksets inspected by Shimano authorised retailers, and will replace any cranksets that do not pass the inspection process. There is no need for replacement for cranksets that pass the inspection process.
Not all 11-speed HOLLOWTECH II road cranksets need to be inspected. Only cranksets produced between June 1, 2012, up to and including 30 June 2019, need to be inspected; Shimano expects only a very small percentage of these cranksets will need to be replaced. Consumers should follow the Crank Identification and Inspection Process below or visit bike.shimano.com to learn more.
Shimano has shared a set of guidelines and steps to explain the process:
Click to learn about the identification process in this video, or follow the instructions in STEP 1.
Crank Identification and Inspection Process
STEP 1 – Determine whether your crankset needs to be inspected
STEP 1A – Identify the model number of your crankset
The affected products are DURA-ACE and ULTEGRA branded cranksets with the following model numbers: ULTEGRA FC-6800, FC-R8000 and DURA-ACE FC-9000, FC-R9100 and FC-R9100-P. The model numbers are stamped on the inside of the crank arm near the bottom of the arm (see yellow square in the image below).
Does the model number on your crank arm match the model numbers above?
NO: The crankset is not affected, and no further action is needed.
YES: Proceed to STEP 1B.
STEP 1B – Identify the manufacturing code stamped on your crank arm
A manufacturing code is stamped on the inside of the crank arm near the bottom of the arm (see the blue square in the image above). The affected models are pre-July 2019 production and have the following two-letter production codes: KF, KG, KH, KI, KJ, KK, KL, LA, LB, LC, LD, LE, LF, LG, LH, LI, LJ, LK, LL, MA, MB, MC, MD, ME, MF, MG, MH, MI, MJ, MK, ML, NA, NB, NC, ND, NE, NF, NG, NH, NI, NJ, NK, NL, OA, OB, OC, OD, OE, OF, OG, OH, OI, OJ, OK, OL, PA, PB, PC, PD, PE, PF, PG, PH, PI, PJ, PK, PL, QA, QB, QC, QD, QE, QF, QG, QH, QI, QJ, QK, QL, RA, RB, RC, RD, RE, and RF.
Does the manufacturing code on your crank arm match any of the two-letter productions codes above?
NO: The crankset is not affected. No further action is required.
YES: Proceed to STEP 2.
Consumers who believe they have an affected product are asked to contact an authorized Shimano dealer to schedule a free crankset inspection. If you are unsure of how to check the manufacturing code visit your local Shimano dealer. Please see the CONTACT section below for instructions on how to contact Shimano for assistance.
Consumers with cranksets that do not fall within the specified model number and manufacturing codes do not need to take further action. Please proceed to STEP 3.
STEP 2 – Take the bicycle to the dealer for inspection
Shimano has developed the crankset inspection process and will provide clear instructions and tutorials for dealers. Shimano anticipates that the inspections will be possible starting from OCTOBER 1, 2023. Further details will be announced shortly via bike.shimano.com/en-EU/information/customer-services/corrective-actions/important-safety-notice-11-speed-hollowtech-road-cranksets-inspection-program.html and bike.shimano.com.
The dealer will inspect the crankset for signs of bonding separation or delamination.
Consumers whose cranksets show signs of bonding separation or delamination during the inspection will be provided a free replacement crankset from Shimano that the dealer will professionally install. If your crankset needs replacement following the inspection, please do not use it. If a replacement crankset is temporarily unavailable, Shimano will notify you through your dealer when the replacement is ready.
The replaced crankset will be a special version, which may feature a different cosmetic appearance while maintaining the same level of performance.
STEP 3 – Ride safely and continue to maintain your bicycle/equipment
If your crankset passes the inspection and has no signs of delamination, we appreciate your patience and diligence in having the inspection completed. Please continue to enjoy your ride.
Have your bike tuned up and inspected regularly, ask your dealer for recommendations based on your riding habits. Pay attention to changes in the sound and feel of how your bike is riding. Shimano and other manufacturers urge all users to thoroughly read the user manual provided with the bicycle and all individual components to ensure safe usage and proper maintenance. Shimano product manuals are available online at: si.shimano.com).
Contact
For contact details and further information, please visit the SHIMANO website at https://bike.shimano.com/en-EU/information/customer-services/corrective-actions.html. From the website, you can contact Shimano’s call center that has been established specifically for the crankset inspection program.
